Some armor has default vest sizes. Using a sizing chart you can estimate the closest generic size, however ordering with a sizing form will always give you the most accurate sizing.
Female vests should always be ordered with a sizing for a proper fit. In some cases male vests could be used, but it is usually not recommended.
To estimate your size to the closest generic vest size:
Measure your chest and add 2, i.e. 40+2=42.
Measure your waist and add 6, i.e. 38+6=44.
Pick the larger of the two, in this case 44.
If you have more than 6 between these two numbers average them out and if necessary round up to the nearest even number, i.e. 48μ40=44.
Measure your front length while sitting.
(Clavicle to above the navel)
13 to 14 = R and 15 to 16 = L
If your vest rises up when sitting, the SSBS Neoprene straps can be trimmed to raise the vest.
NOTE: In this case, please call us so as not to damage the product and void your warranty.
Understand that these are estimations for a quick fit; for a proper fit it's always best to order with a sizing form. The professionals at Body Armor Outlet can walk you through the process if you have any questions.
How to tell if your concealable body armor fits correctly: Concealable body armor should cover your center mass vitals, and achieve anywhere from a 2 inch gap on each side (for the most mobility) to overlapping of the ballistic panels on the sides where the front and back panels meet (for the most protection).
The first thing to remember when trying on vests is that your front panel should always lay over your rear panel as threats typically come from in front of you, and this ensures that the overlap on the side of the vest is rear facing.
A correctly sized vest will cover you from 1-1.5 inches below the top of your breastbone, to 1-2 inches above your navel (belly button) in length. The width, as mentioned earlier, should achieve anywhere from a 2 inch gap to 1" of overlapping where the front and rear panels meet. Your personal preference may dictate minor variations in comfort, mobility, concealment, and protection.
A vest that is too small for the user will lack the needed coverage to ensure proper protection with large gaps of coverage as well as being too tight and constricting, whereas a vest that is too large will shift, bunch, and crumple while it's being worn, causing pinch points and poor protection. It is a crucial step when buying body armor to ensure that it fits properly so that it performs at its peak level.
If you have any questions at all about armor sizing, don't hesitate to call us. Our highly trained staff will assist you in getting the best fit possible.
For charts, choose from one of our available sizing charts below.
The LTS Shielddelivers robust protection and advanced features for tactical operations. It provides stand-alone Level III protection against rifle rounds, ensuring effective defense in high-threat scenarios. This shield has been rigorously tested and verified by an NIJ-accredited laboratory to meet or exceed the ballistic resistance criteria specified in NIJ Standard 0108.01.
Constructed from UHMWPE-based material, the shield features a durable Polyurea exterior with Rhino Extreme™ 11-50 anti-spall coating, enhancing its resilience and multi-hit capability. The 4”x10” ballistic viewport allows for clear visibility while maintaining the shield’s protective integrity.
Finished in black with a transparent viewport, the shield combines tactical functionality with a professional appearance. It comes standard with the Bellfire C handle, a lightweight and ergonomically designed ambidextrous handle, and offers multiple upgrade options for enhanced handle configurations. The shield also includes a quick-release neck strap, a molded rubber forearm strap, and a carrying bag for easy transport.
While the shield does not include an LED light by default, there are multiple upgrade options available for integrating LED light platforms. It is covered by a 5-year warranty on all ballistic materials (excluding the exterior cover) and a 1-year warranty on the exterior cover material and workmanship, ensuring long-term reliability and performance in demanding conditions.
Specifications:
Protection Level: Level III stand-alone against rifle rounds
NIJ Standard 0108.01 TESTED: Tested and verified to meet or exceed ballistic resistance as specified within NIJ Standard 0108.01 by an NIJ accredited laboratory
Material: UHMWPE-based material
Exterior cover: Polyurea with Rhino Extreme™ 11-50 anti-spall coating
Multi-hit capability
Ballistic viewport: 4”x10”
Color: Black with transparent viewport
Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship
Features:
Handle: Comes standard with Bellfire C handle, a lightweight, ergonomically designed ambidextrous handle; multiple handle upgrades available
Straps and bag: Quick-release neck strap, molded rubber strap, and shield carrying bag
Optional LED light: Upgrade offered for LED light platforms; shield does not come standard with a mounted light
