Some armor has default vest sizes. Using a sizing chart you can estimate the closest generic size, however ordering with a sizing form will always give you the most accurate sizing.
Female vests should always be ordered with a sizing for a proper fit. In some cases male vests could be used, but it is usually not recommended.
To estimate your size to the closest generic vest size:
Measure your chest and add 2, i.e. 40+2=42.
Measure your waist and add 6, i.e. 38+6=44.
Pick the larger of the two, in this case 44.
If you have more than 6 between these two numbers average them out and if necessary round up to the nearest even number, i.e. 48μ40=44.
Measure your front length while sitting.
(Clavicle to above the navel)
13 to 14 = R and 15 to 16 = L
If your vest rises up when sitting, the SSBS Neoprene straps can be trimmed to raise the vest.
NOTE: In this case, please call us so as not to damage the product and void your warranty.
Understand that these are estimations for a quick fit; for a proper fit it's always best to order with a sizing form. The professionals at Body Armor Outlet can walk you through the process if you have any questions.
How to tell if your concealable body armor fits correctly: Concealable body armor should cover your center mass vitals, and achieve anywhere from a 2 inch gap on each side (for the most mobility) to overlapping of the ballistic panels on the sides where the front and back panels meet (for the most protection).
The first thing to remember when trying on vests is that your front panel should always lay over your rear panel as threats typically come from in front of you, and this ensures that the overlap on the side of the vest is rear facing.
A correctly sized vest will cover you from 1-1.5 inches below the top of your breastbone, to 1-2 inches above your navel (belly button) in length. The width, as mentioned earlier, should achieve anywhere from a 2 inch gap to 1" of overlapping where the front and rear panels meet. Your personal preference may dictate minor variations in comfort, mobility, concealment, and protection.
A vest that is too small for the user will lack the needed coverage to ensure proper protection with large gaps of coverage as well as being too tight and constricting, whereas a vest that is too large will shift, bunch, and crumple while it's being worn, causing pinch points and poor protection. It is a crucial step when buying body armor to ensure that it fits properly so that it performs at its peak level.
If you have any questions at all about armor sizing, don't hesitate to call us. Our highly trained staff will assist you in getting the best fit possible.
For charts, choose from one of our available sizing charts below.
Unless in stock, most Mira Safety products have a 1 to 2 week lead time.
MD-1 Children's Gas Mask - Full-Face Protective Respirator for CBRN Defense
The MD-1 is one of the only dedicated, reusable children’s gas mask available on the market today.
It’s engineered to meet the same strict standards as our adult masks, with a lighter weight, more compact size, and detachable hose for reduced weight and improved comfort. It uses the same NATO standard 40 mm filters as all other MIRA Safety gas masks and is also compatible with our Powered Air-Purifying Respirator (see below).
The MD-1 Children’s Gas Mask is available in two sizes:
Medium: Children 2 to 6 years old
Large: Kids 6 to 12 years old
Designed to Protect Children Against:
Poisonous substances
Biological aerosols
Radioactive dust
Iodine radionuclides and their organic compounds
Aerosols (dust, fog, fumes)
Key Features:
Manufactured in 2021 with a 10-year shelf life
Articulating mesh 5-point head harness for added comfort
Made from durable and chemical-resistant natural rubber
Designed with a panoramic polycarbonate visor (>70% field of vision) for added situational awareness
Comes with an oro-nasal inner mask to prevent fogging
Can be used in temperatures ranging from –30 to 50°C
Uses standard 40 mm NATO threaded filter cartridges
Comes with a 40 mm tube that can be used to reduce the weight on a child's face, allowing the filter to be carried in a pouch
Weighs in at just over 1 lb. with hose attached
Available in two sizes for children of different ages
Made in Serbia
Protection for those that need it most
Nothing is more important than the health and welfare of our children. Yet, there has been no protection available for them in the event of a fire, major natural disaster, nuclear event, or terrorist attack … until now.
Our MD-1 Children’s Gas Mask is one of the only reusable CBRN full-face respirator designed with the special needs of children in mind.
Unlike expensive, single-use alternatives, the MD-1 uses the same 40 mm filters as most adult masks mask, allowing you to rely on a single supply of canisters (like our cutting-edge technology MIRA canister filters that feature an extended 20-year shelf life) to maximize the odds of survival in the event of a disaster. It’s also compatible with accessories like our Powered Air-Purifying Respirator (PAPR).
Originally designed as a child respirator to meet strict protective standards for the government of Yugoslavia, we’ve adapted and improved on this rugged design to bring it into the twenty-first century, with an enhanced head harness, updated materials, and compatibility with 40 mm NATO threaded filters.
Proper respiratory protection is especially vital for young children, as they are still growing. They are far more susceptible to airborne contaminants and respiratory damage, which could cause a lifetime of adverse health effects. This is especially true of radioactive contaminants, which can dangerously increase the risk of cancer and other life-threatening diseases.
Because of its smaller size, this children’s gas mask weighs far less than an adult mask, with optimized airflow for easier breathing and reduced fatigue. Using the filter hose attachment (included), it weighs approximately 18 ounces.
Applications:
Emergency preparedness
Natural disasters
Technology-related accidents accompanied by hazardous substance emissions
Kit includes:
(1) MD-1 Childrens Gas Mask
(1) 40 mm NATO threaded extension hose
Technical Data:
Weight: 500g maximum (without bag or filter)
Field of View: >70°
Material of Facepiece: Natural Rubber
Facepiece Color: Navy Blue
Material of Visor: Polycarbonate
Filter Connection Thread: EN 148-1 Standard 40 mm x 1/7”
Exhalation Resistance at 30l/min Airflow: 90 Pa
The protection time for S-mustard is a minimum of 180 minutes.
Test conditions:
Density of contamination: 17 ± 1 mg S-mustard / 10 cm2
Breakthrough density of contamination: 5 µg S-mustard / 1 cm2
Test tube thickness: 2.5 mm
Test temperature: 36 ± 1°C
Storage:
Standard MD-1 Children’s Gas Masks must be stored in a dark, cool, dust-free environment that is ventilated regularly and free from sudden temperature changes. Temperatures may vary between 5°C and 25°C with relative humidity up to 60%. The stored products should not be exposed to radiant heat or sunshine. Fuels, solvents, lubricants, and other inflammable substances must not be stored with the masks.
Do not store with or near any electrical machines or appliances that produce electric sparks or discharges during operation (ozone creation).
Avoid deformation of the rubber parts of the facepiece and internal mask when storing the masks. Inspect gas masks regularly to ensure they effectively seal to the user's face, as needed.
IMPORTANT NOTE: Due to breathing resistance on all negative pressure gas masks, a “balloon” test is recommended to ensure that a mask can be safely used during an emergency. A standard negative-pressure gas mask should only be used by children that can blow up a balloon with their own lung power.
Even if your child passes the balloon test, we highly recommend using a Powered Air-Purifying Respirator (PAPR) with the MD-1 Children’s Gas Mask to reduce fatigue. PAPRs use a powered fan unit to improve airflow and create positive pressure for added protection from airborne contaminants. MIRA Safety’s PAPR unit is flexible and can be used with any of our 40mm NATO standard gas masks.
Please note that gas mask filters and accessories are sold separately.
