Some armor has default vest sizes. Using a sizing chart you can estimate the closest generic size, however ordering with a sizing form will always give you the most accurate sizing.
Female vests should always be ordered with a sizing for a proper fit. In some cases male vests could be used, but it is usually not recommended.
To estimate your size to the closest generic vest size:
Measure your chest and add 2, i.e. 40+2=42.
Measure your waist and add 6, i.e. 38+6=44.
Pick the larger of the two, in this case 44.
If you have more than 6 between these two numbers average them out and if necessary round up to the nearest even number, i.e. 48μ40=44.
Measure your front length while sitting.
(Clavicle to above the navel)
13 to 14 = R and 15 to 16 = L
If your vest rises up when sitting, the SSBS Neoprene straps can be trimmed to raise the vest.
NOTE: In this case, please call us so as not to damage the product and void your warranty.
Understand that these are estimations for a quick fit; for a proper fit it's always best to order with a sizing form. The professionals at Body Armor Outlet can walk you through the process if you have any questions.
How to tell if your concealable body armor fits correctly: Concealable body armor should cover your center mass vitals, and achieve anywhere from a 2 inch gap on each side (for the most mobility) to overlapping of the ballistic panels on the sides where the front and back panels meet (for the most protection).
The first thing to remember when trying on vests is that your front panel should always lay over your rear panel as threats typically come from in front of you, and this ensures that the overlap on the side of the vest is rear facing.
A correctly sized vest will cover you from 1-1.5 inches below the top of your breastbone, to 1-2 inches above your navel (belly button) in length. The width, as mentioned earlier, should achieve anywhere from a 2 inch gap to 1" of overlapping where the front and rear panels meet. Your personal preference may dictate minor variations in comfort, mobility, concealment, and protection.
A vest that is too small for the user will lack the needed coverage to ensure proper protection with large gaps of coverage as well as being too tight and constricting, whereas a vest that is too large will shift, bunch, and crumple while it's being worn, causing pinch points and poor protection. It is a crucial step when buying body armor to ensure that it fits properly so that it performs at its peak level.
If you have any questions at all about armor sizing, don't hesitate to call us. Our highly trained staff will assist you in getting the best fit possible.
For charts, choose from one of our available sizing charts below.
Unless in stock, most Mira Safety products have a 1 to 2 week lead time.
CM-6M Tactical Gas Mask - Full-Face Respirator for CBRN Defense
Combining premium features with superior mil-spec construction, MIRA Safety’s CM-6M CBRN Tactical Gas Mask protects your face, internal organs and respiratory system against a full spectrum of toxic industrial chemicals (TIC) and chemical warfare agents (CWA) including chemical, biological and nuclear threats such as radioactive dust, noxious gas, vaporized pollutants and more.
This is a reusable full-face respirator/gas mask originally designed for professional use in industrial, agricultural, police and rescue squads, and civil defense settings. The CM-6M is marked with a “CE” symbol and is manufactured and marked in accordance with the EN 136:1998 standard, class III and EN 148-1.
Features:
20-year shelf life
Compatible with the MIRAVISION Spectacle Kit (sold separately)
Trusted by police worldwide and government entities in the Czech Republic, Norway, Portugal, Chile, Saudi Arabia, Turkey, Kuwait, Latvia and Lebanon
Durable bromobutyl rubber construction (meets CBRN protection standards)
Full-face panoramic design with a large visor to enable a wide-angle view
Hypoallergenic inner mask prevents fogging, even under hard use
Tested resistance to mustard gas penetration for nearly 30 hours
Helmet-compatible
Fits up to 2 standard 40-mm 1/7” NATO filter cartridges (widely available with varying protection levels)
Comes with a pre-installed hydration system and canteen. The canteen has a capacity of 900ml.
Compatible with CamelBak water bladders with a Type M adapter (not included)
Used for industrial, agricultural, law enforcement, professional rescue, specialized welding, construction and painting applications
Conforms to European quality and sustainability standards, marked with the CE symbol
Meets all requirements under EN 136:1998, Class III
Complies with all standards under EN 168 for impact protection, making this the perfect mask for riot control situations
Carries MIRA Safety’s special 5-year manufacturer warranty
Compatible with the TAPR-M Microphone and RVA (A.01) VPU Unit
Manufactured in the Czech Republic
Technical Specifications:
The CM-6M Tactical Gas Mask has a facepiece of tough bromobutyl rubber (CBRN-compliant) for maximum resistance to TIC/CWA contaminants. The full-face respirator’s inner mask is made from a special hypoallergenic compound that ensures excellent tightness and avoids exhaled air contact with the visor to prevent fogging. It also reduces carbon dioxide(CO2) content in the mask’s inner space, which together with its favorable inhalation/exhalation breathing resistance, decreases the physiological burden for the user—providing more comfortable and practical all-day use.
The integrated speech diaphragm ensures at least 95% intelligibility of speech, allowing for easy communication with other members of your party. The mask is equipped with a six-point rubber-textile head harness to ensure a snug and lasting fit.
The CM-6M CBRN gas mask is produced in one size. To ensure proper functioning, the user’s face must be smooth, free of facial hair, sideburns and other hindrances at the points of contact.
The tactical gas mask is compatible with the 3M Safety 6878 Spectacle Kit (sold separately), with simple installation for those who are vision impaired and prefer not to wear contacts.
The filter is fitted to the mask by screwing to the left or right inhalation chamber. The unused chamber (without filter) is sealed with an inhalation chamber plug. It is necessary to ensure the plug is properly screwed and tightened.
Inhalation chambers of the CM-6M mask are ONLY compatible with Rd 40 x 1/7” thread in accordance with the EN 148-1 standard.
Selection of a suitable filter depends on the type and concentration of anticipated toxic agent. The CM-6M tactical mask equipped with a TIC or CWA filter is only safe for use in an environment containing at least 19.5% oxygen. The principles of filter selection and application are described in the filter user guides.
The CM-6M tactical gas mask may be used in class 1 explosive environments only. The CM-6M mask meets all of the requirements for class 3 of the EN 136 standard. It’s a great choice for riot gear or as a riot control gas mask.
Technical Data:
560g
95%
1 size
bromine-butyl rubber
Effective field of vision. 77.6%
polycarbonate
Overlapped field of vision. 83.8%
Rd 40 x 1/7"
Breathing resistance at 30l/min. air flow:
max. 30 Pa
max. 60 Pa
Storage:
The CM-6M tactical gas mask must be stored in a dark, cool and dust-free place free from sudden temperature changes. The storage room should be ventilated regularly. Temperatures may vary between 10°C and 25°C within relative humidity up to 65%. Full face gas masks must not be exposed to radiant heat or sunshine. Fuels, solvents, lubricants and other inflammable substances, including chemicals, must not be stored with masks. Moreover, there must not be any electrical machines or appliances that produce sparks or discharges during operation (ozone creation).
Avoid deformation of the rubber parts of the facepiece and internal CBRN gas mask during storage.
