RMA Model 1155 Level IV SA Hard Armor Plate - Single Curve Side Plate
Product Code: RMA-THAP1155SP-6x6
Availability:Out of stock
Size chart
Sizing Charts
Some armor has default vest sizes. Using a sizing chart you can estimate the closest generic size, however ordering with a sizing form will always give you the most accurate sizing.
Female vests should always be ordered with a sizing for a proper fit. In some cases male vests could be used, but it is usually not recommended.
To estimate your size to the closest generic vest size:
- Measure your chest and add 2, i.e. 40+2=42.
- Measure your waist and add 6, i.e. 38+6=44.
- Pick the larger of the two, in this case 44.
- If you have more than 6 between these two numbers average them out and if necessary round up to the nearest even number, i.e. 48μ40=44.
- Measure your front length while sitting.
- (Clavicle to above the navel)
- 13 to 14 = R and 15 to 16 = L
- If your vest rises up when sitting, the SSBS Neoprene straps can be trimmed to raise the vest.
- NOTE: In this case, please call us so as not to damage the product and void your warranty.
Understand that these are estimations for a quick fit; for a proper fit it's always best to order with a sizing form. The professionals at Body Armor Outlet can walk you through the process if you have any questions.
How to tell if your concealable body armor fits correctly:
Concealable body armor should cover your center mass vitals, and achieve anywhere from a 2 inch gap on each side (for the most mobility) to overlapping of the ballistic panels on the sides where the front and back panels meet (for the most protection).
The first thing to remember when trying on vests is that your front panel should always lay over your rear panel as threats typically come from in front of you, and this ensures that the overlap on the side of the vest is rear facing.
A correctly sized vest will cover you from 1-1.5 inches below the top of your breastbone, to 1-2 inches above your navel (belly button) in length. The width, as mentioned earlier, should achieve anywhere from a 2 inch gap to 1" of overlapping where the front and rear panels meet. Your personal preference may dictate minor variations in comfort, mobility, concealment, and protection.
A vest that is too small for the user will lack the needed coverage to ensure proper protection with large gaps of coverage as well as being too tight and constricting, whereas a vest that is too large will shift, bunch, and crumple while it's being worn, causing pinch points and poor protection. It is a crucial step when buying body armor to ensure that it fits properly so that it performs at its peak level.
If you have any questions at all about armor sizing, don't hesitate to call us. Our highly trained staff will assist you in getting the best fit possible.
For charts, choose from one of our available sizing charts below.
US Armor Sizing
Galvion
Note: this product is one (1) plate only.
Model 1155 Level IV SA Hard Armor Plate - Single Curve Side Plate
The Model #1155 Level 4 plates from RMA are highly sought after for their affordability and superior protection. These stand-alone armor plates are multi-hit rated and provide exceptional edge-to-edge Level IV protection. Each RMA 1155 Level 4 plate is meticulously wrapped, ensuring water resistance and professional quality. Manufactured entirely at RMA’s facility in Centerville, Iowa, these plates guarantee reliability and performance.
RMA 1155 Level 4 Plates – The Armor Standard for Durability
This cost-effective Level IV body armor plate boasts exceptional durability and surpasses Level IV NIJ testing standards. It demonstrates resilience against multiple M2AP 30-06 strikes while ensuring comprehensive edge-to-edge protection.
RMA Armament goes above and beyond in constructing all their Level IV body armor plates, exceeding NIJ testing criteria to safeguard customers in critical situations. Not only does this ceramic body armor plate withstand multiple hits, including popular rounds like the m855a1, m193, and 7.62×39 msc, but it also offers unparalleled protection. When it comes to body armor, settle for nothing less than the best to ensure your safety.
RMA's 10" x 12" 1155 Level IV ceramic body armor plate, rated for multiple hits, is the ultimate addition to your home defense kit. It delivers military and law enforcement-grade protection to your family at an incredibly reasonable price.
RMA stands as the preferred choice for body armor plates among law enforcement professionals across the United States. Renowned for their strength, superior engineering, and efficiency, RMA outperforms all competitors. Founded and operated by a former police officer and US Marine with experience in two careers wearing armor, RMA understands and delivers what you need for optimal protection.
Features:
- Single-Curve, square side plate cut
- Protection Level: IV Stand Alone
- Monolithic Ceramic & Polyethylene
- 600 Denier Water Resistant Cover
- Thinness: 1.00"
- 2.47 lbs. (3.49 kg) per plate
- Model: BAO 1155SP
- NIJ 0101.06 Tested
- Free Incident Replacement (If it saves your life, please let us know!)
- 10-Year Manufacturer's Warranty
- Made in USA
Protection Information:
Weapon Type | Ammunition | Striking Velocity Ft/s ± 30 | Striking Velocity M/s ± 9 |
Rifle M-1 | 7.62 x 63mm - M2AP | 2880 | 878 |
Rifle M-1 | 7.62 x 63mm - JSP | 2780 | 847 |
Rifle SVD, Dragunov | 7.62 x 54R B-32 API | 2800 | 854 |
Rifle SVD, Dragunov | 7.62 x 54R LPS | 2840 | 865 |
Rifle SVD, Dragunov | 7.62 x 54R L | 2840 | 865 |
Rifle FN FAL | 7.62 x 51 mm M80 | 2780 | 847 |
Rifle AK-47 | 7.62 x 39 mm Ball/Steel Core/API | 2380 | 725 |
Rifle M-16/AR-15 | 5.56 x 45 mm M855/SS109 | 3117 | 950 |
Rifle M-16/AR-15 | 5.56 x 45 mm M193 | 3150 | 960 |