Some armor has default vest sizes. Using a sizing chart you can estimate the closest generic size, however ordering with a sizing form will always give you the most accurate sizing.
Female vests should always be ordered with a sizing for a proper fit. In some cases male vests could be used, but it is usually not recommended.
To estimate your size to the closest generic vest size:
Measure your chest and add 2, i.e. 40+2=42.
Measure your waist and add 6, i.e. 38+6=44.
Pick the larger of the two, in this case 44.
If you have more than 6 between these two numbers average them out and if necessary round up to the nearest even number, i.e. 48μ40=44.
Measure your front length while sitting.
(Clavicle to above the navel)
13 to 14 = R and 15 to 16 = L
If your vest rises up when sitting, the SSBS Neoprene straps can be trimmed to raise the vest.
NOTE: In this case, please call us so as not to damage the product and void your warranty.
Understand that these are estimations for a quick fit; for a proper fit it's always best to order with a sizing form. The professionals at Body Armor Outlet can walk you through the process if you have any questions.
How to tell if your concealable body armor fits correctly: Concealable body armor should cover your center mass vitals, and achieve anywhere from a 2 inch gap on each side (for the most mobility) to overlapping of the ballistic panels on the sides where the front and back panels meet (for the most protection).
The first thing to remember when trying on vests is that your front panel should always lay over your rear panel as threats typically come from in front of you, and this ensures that the overlap on the side of the vest is rear facing.
A correctly sized vest will cover you from 1-1.5 inches below the top of your breastbone, to 1-2 inches above your navel (belly button) in length. The width, as mentioned earlier, should achieve anywhere from a 2 inch gap to 1" of overlapping where the front and rear panels meet. Your personal preference may dictate minor variations in comfort, mobility, concealment, and protection.
A vest that is too small for the user will lack the needed coverage to ensure proper protection with large gaps of coverage as well as being too tight and constricting, whereas a vest that is too large will shift, bunch, and crumple while it's being worn, causing pinch points and poor protection. It is a crucial step when buying body armor to ensure that it fits properly so that it performs at its peak level.
If you have any questions at all about armor sizing, don't hesitate to call us. Our highly trained staff will assist you in getting the best fit possible.
For charts, choose from one of our available sizing charts below.
The average lead time on these plates is 1 to 2 weeks on small orders, larger orders can expect 4 to 5 weeks.
RMA Defense Lightweight Level IV Plate Model 1165
Level IV NIJ .06 Tested Hard Armor Plate, Stand Alone, Shooter's Cut, Multi Curve, 10x12
The price listed is for one plate.
Lightweight Level 4 plates aren’t new–but they are at this price. RMA is proud to introduce their brand new 1165 lightweight level 4 plates. Evolving from the tried-and-true high-performance 1155 design, these plates cut weight, thickness, and price. It’s the best value in American-made body armor. Made from 100% American materials, RMA combined their high performance multi-hit capable Alumina Oxide strike face with a lightweight Dyneema UHMWPE backer to create affordable lightweight level 4 plates.
Shed Weight, Not Dollars
RMA 1165 Lightweight Level 4 plates are the ultimate expression of our mission; to make the world’s best body armor available for all Americans. Typically, manufacturers save weight by using lighter weight ceramics like silicon and boron. RMA does that too, but it comes at a cost. Their 1192 series is a fantastic lightweight level 4 plate, but is more on the expensive side. Boron/Silicon carbide is more expensive to make, and thus ultimately results in a more expensive plate.
RMA wondered if there were other ways to save weight while keeping costs down. Legendary Dyneema UHMWPE was the answer. This high strength material works as a lightweight backer to their famous RMA alumina strike face. While this requires a bit more labor and machine time, it cuts about 1.5 lbs from the weight of their best-selling 1155 plate. You can expect both high performance and low weight from their new 1165 plates. And your wallet? It will stay a little heavier at such an affordable price.
Plus, they’ve slimmed the 1165 down to only 0.8 inches thin. Save weight, save thickness, and save money.
Pair their 1165 10X12 plates with one of BAO's line of best-selling Dynamic Plate Carriers for the best value in protection, mobility, and price.
Features:
Stand Alone Level IV Armor
Full Edge-to-Edge Protection on its 10″x12″ Strikeface
